Product Overview
Remove the deflection of the factory rubber bushings with these solid spherical bearings. We use high quality PTFE lined sphericals in all our solid bushings. We drill holes and machine a deep dish into the bearing cup, along with a scallop into the stainless steel spacers to remove every ounce we can. These bushings are sold as a pair. A press and snap ring plyers are needed for install. Come in an "as machined" finish. You may notice a slight increase in NVH and we don't recommended these for cars that do a lot of street driving.
- Remove deflection of the rubber bushings
- Maintain better wheel alignment under loaded conditions
- Increased stability under hard braking
- Holes, deep dish and scalloped spacers remove excess weight
Install tips: Put our bearings in the freezer ahead of install. Use a flap wheel and/or file to clean up and deburr the control arm or hub. Use a heat gun or torch on the control arm or hub where they are being pressed in. Apply some Bearing Retaining Compound to assist in install.
