Product Overview
Remove the deflection of the factory rubber bushings with these solid spherical bearings. We use high quality PTFE lined sphericals in all our solid bushings. We machine a deep dish into the bearing cup, along with a scallop into the stainless steel spacers to remove every ounce we can. These bushings are sold as a pair. A press and snap ring plyers are needed for install. Come in an "as machined" finish. You may notice a slight increase in NVH and we don't recommended these for cars that do a lot of street driving.
- Remove deflection of the rubber bushings
- Maintain better wheel alignment under loaded conditions
- Increased stability under hard braking
- Deep dish and scalloped spacers remove excess weight
- Replaces the rubber Toe Link Bushing in the rear knuckle with a Teflon Lined Spherical Bearing
Install tips: Put our bearings in the freezer ahead of install. Use a flap wheel and/or file to clean up and deburr the control arm or hub. Use a heat gun or torch on the control arm or hub where they are being pressed in. Apply some Bearing Retaining Compound to assist in install.
