Product Overview
We made this Rad Gap Filler to seal up the large void between the condenser and radiator at the top of our shop GT350 to help increase cooling capacity, as well as a small increase in Downforce and a slight drag reduction. We've had someone install these on a base GT as well and they work just the same. Sealing this gap mainly increases the cooling capacity of your car, along with wind tunnel data showing a small decrease in drag, and a small increase in downforce when installed. This is because instead of air slipping around the radiator adding to under hood pressure and making a mess, it is now forced through the radiator. In the video below, we ran monometer tests with a pressure differential from the front to back of the radiator and saw .15" of pressure difference prior to the gap filler, and jumped up to around .35" of pressure difference after! This is quite a large gain across the top of the radiator. Comes with everything pictured and install should be around 30 minutes.
Note: After selling 2 dozen or so of these kits, we found out the the 2015 PP equipped cars may have come with some sort of factory shield where these may not be usable. Please watch our install video to make sure your car isn't equipped with this piece.
